Translucent and repositionable low adhesive film, 6mil
Exceptionally vivid image quality and resolution
Moisture resistant suitable for high humidity and condensation
Clings tightly to smooth surfaces
Low Adhesive - residue free, easy to install and remove

READ ALL INSTRUCTIONS CAREFULLY BEFORE APPLYING

Note Before Installing: unpack material and lay flat or hang for 24 hours to stabilize

Clean hands thoroughly to prevent dirt and oils from your hands getting on the surface
of the window decoration.

1. Clean surface thoroughly before applying. Do not use ammonia based window
cleaners. Wipe dry with a lint free cloth.

2. Starting at the top of the window decoration peel the backing paper down about
12 inches. Position it on the surface of the glass. Use your hands to smooth out
any large bubbles. It is necessary to place the side of the decoration that is on
the backing paper to the glass.

3. It is normal to have excess material overhang the edges. This will be trimmed
latter.

4. Be sure to make every effort on alignment of the window decoration at this
point. If the decoration needs to readjusted, do so now before any more backing
is exposed.
When you are satisfied with placement, slowly continue to work down the window
removing the backing paper as you go. Using a rubber tipped squeegee, plastic drivers license, or credit card type object,
squeegee out the excess air.
NOTE make sure there are no sharp irregularities on edge.

5. Wipe with a lint free cloth. Step Back and look at your work, if any adjustments
need to be made do it now.
Plastic Windows - Interior application is recommended. Please check with
the window manufacturer before applying window cleaner to any plastic
surface. A light soapy water solution is recommended for application and
installation.

GENERAL INFORMATION:
Keep the cardboard tube and backing material, so when you want to change your
decoration they are available.