Visit our new site at
|
||||
![]() |
![]() |
![]() |
![]() |
|
Hi-Pro Window Film InstallationThank You for choosing our high performance polyester vinyl and mounting system. Please treat your new design as if it were a fine art reproduction. Double sided mounting tape is supplied with your order. Installation is as simple as applying the tape around the outside edge of your window or frame. Use more tape for a more permanent installation and less for a temporary install. The tape is a medium tack mounting tape, so even with more tape used the film is still removable. Use short segments on arches and curves. Only 4 square inches of tape will hold up 1/2 pound of wieght. The window should be warm when appling the tape. 40 degrees and up. No water is needed for installation. Use any standard window cleaner, or isprophol alcohol for cleaning the window prior to installation. The double-sided tape is recommended for window glass, painted wood, finished/varnished wood, aluminum and vinyl. The two most common reasons for the tape not to work are: the surface wasn't clean before you applied the tape, or the surface is too cold for the tape to stick. Heat the surface with a hair dryer.(When temperatures drop below 40 degrees Fahrenheit, adhesives tends to harden and won't stick.) GENERAL INFORMATION: Two Partners & A Dream |







